Controls and functions, Front panel – Yamaha RX-V596RDS User Manual

Page 6

Advertising
background image

4

L

R

+

+

1

2

3

4

6

5

7

8

9 0

q

w e r t y u i o p a

s d

f

6

VOLUME

Turn this control to turn up or down the volume.

7

PHONES jack

Connect the headphones to the PHONES jack. You can
listen to the sound to be output from the main speakers
through the headphones.
When listening with headphones privately, set both
SPEAKERS A and B to the OFF position, press EFFECT to
turn off the effect speakers (center and rear) and set “BASS
OUT” on the SET MENU to the MAIN position (so that no
DSP program name appears on the display).

8

SPEAKERS

Set A or B (or both A and B) to the ON position for the main
speaker system (connected to this unit) that you want to use.
Set the button(s) to the OFF position for the main speaker
system that you don’t want to use.

9

PROGRAM selector

Press l or h to select a DSP program when the effect
speakers (center and rear) are turned on. The name of the
selected program appears on the display.

0

EFFECT

Press this button to turn on or off the effect speakers (center
and rear). If you turn them off, the signals of the center and
rear channels are directed to the right and left main speakers
when playing a source encoded with Dolby Digital and
DTS. In this case, the output levels of the right and left
speakers may not match.

CONTROLS AND FUNCTIONS

Front Panel

1

STANDBY/ON

Press this switch to turn on the power of this unit or to set
this unit in the standby mode. Before turning the power on,
set VOLUME to the “m” position.

Standby mode

In this mode, this unit consumes a very small quantity of
power to receive infrared-signals from the remote
control.

2

Remote control sensor

This receives signals from the remote control.

3

Display

This shows various information. (Refer to page 6 for
details.)

4

INPUT MODE

Press this button to select the input mode among AUTO,
DTS and ANALOG for the DVD/LD, TV/digital TV and
cable TV/satellite tuner sources.

5

INPUT SELECTOR

Turn this selector to select the input source (TUNER, CD,
PHONO, CBL/SAT, V-AUX, VCR, D-TV, DVD/LD) that
you want to listen to or watch. The arrow for the selected
input source indicator lights up on the display.

0102V596RDS01-08_EN

2/29/0, 3:28 PM

4

Advertising