Zonet Technology ZEW3003 - Manual (Page 24)

22
4.6 WDS
Wireless Distribution System uses wireless media to communicate with other access
points, like the Ethernet does. To do this, you must set these access points in the same
channel and set the MAC address of other access points you want to communicate with
in the table.
Note: You need to configure WDS setting when selecting AP or AP+WDS radio mode.
Wireless Bridge MAC: Input the MAC address of another access point.
Description: The description of wireless bridge.
Current Wireless Bridge Information: The added MAC addresses are listed here.
4.7 MAC Filter
Enable Wireless Access Control: Enable it to select one button to Permit or
Deny the wireless connection from MAC address list.
MAC: To specify an external IP address, please add the MAC address manually and
click Add.
Description: The description of this setting.
MAC Address List: The added MAC addresses are listed here. Click Delete to
delete the filter management for this MAC address.