Installation, Lamp module, Power horn – X10 Wireless Technology DS7000 User Manual
Page 7: Remote siren (sold separately), Installing the lamp module to control other lights, Local control, Installing the power horn, Testing the power horn
13
12
Installation
Lamp Module
Installing the Lamp Module to control the security light
• Set the House Code and Unit Code dials to match the settings on the Security
Console. This allows it to be controlled from the security light buttons on the remotes.
• Plug a lamp into the Lamp Module and plug the Lamp Module into a convenient AC
outlet, preferably an unswitched one to ensure that the lamp will always operate when
the alarm is triggered.
Installing the Lamp Module to control other lights
• Set the House Code dial to match the House Code set on the Security Console.
• Set the Unit Code dial to an unused code which can be controlled from the Security
Remote (switches 1-4 control Unit Codes 1-4) or from any other remote or plug-in
controller as required.
• Plug a lamp into the Lamp Module and plug the Lamp Module into a convenient AC
outlet, preferably an unswitched one to ensure that the lamp will always operate when
the alarm is triggered.
Local control
The Lamp Module includes circuitry to sense the lamp's own on/off switch to turn the
lamp on locally. To switch a lamp on, turn the lamp's own switch off then on again.
Installation
Installing the Power Horn
• Set the House Code dial to the same House Code as the Security System
• Set the Unit Code dial to an unused code.
• Plug the Power Horn into a convenient AC outlet, preferably an unswitched one to
ensure that the Power Horn cannot be turned off accidentally.
Testing the Power Horn
• Press the ON button on any X10 controller or remote which corresponds to the same
House Code and Unit Code as the Power Horn, hold the button pressed for several
seconds. The siren will continue for 4 minutes, or until an OFF command is received.
• Trigger the security system by pressing the PANIC button on the console or on a
remote. The Power Horn will be activated automatically in the next 4 seconds after the
alarm has been triggered and will continue for around 4 seconds after the system is
disarmed.
Power Horn
™
Remote Siren (sold separately)
A
I
E
M
O
C
G
K
•
•
•
•
•
•
•
•
1
9
5
13
15
3
7
11
•
•
•
•
•
•
•
UNIT
HOUSE
Power Horn
Lamp Module
A
I
E
M
O
C
G
K
1
9
5
13
15
3
7
11
UNIT
HOUSE