ZyXEL Communications Prestige P-870HW-51a v2 - Manual (Page 72)

Chapter 6 LAN Setup
P-870HW-51a v2 User’s Guide
72
The following table describes the fields in this screen.
6.5 The Client List Screen
This table allows you to assign IP addresses on the LAN to specific individual
computers based on their MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC
address is assigned at the factory and consists of six pairs of hexadecimal
characters, for example, 00:A0:C5:00:00:02.
Table 14 LAN > IP
LABEL DESCRIPTION
LAN TCP/IP
IP Address
Enter the LAN IP address you want to assign to your ZyXEL Device in
dotted decimal notation, for example, 192.168.1.1 (factory default).
IP Subnet Mask Type the subnet mask of your network in dotted decimal notation, for
example 255.255.255.0 (factory default).
DHCP Setup
Active DHCP
Server
Select this option to have the ZyXEL Device assign IP addresses and
provide subnet mask, gateway, and DNS server information to the
network. The ZyXEL Device is the DHCP server for the network.
Otherwise, deselect this to not have the ZyXEL Device provide any
DHCP services. The DHCP server will be disabled.
When the ZyXEL Device acts as a DHCP server, the following items
need to be set:
IP Pool Starting
Address This field specifies the first of the contiguous addresses in the IP
address pool.
Pool Size This field specifies the size, or count of the IP address pool.
IGMP Snooping
Active IGMP
Snooping
Select this option to enable IGMP snooping. This allows the ZyXEL
Device to passively learn multicast group.
Apply Click Apply to save your changes back to the ZyXEL Device.