Figure 17 ip alias, Table 14 ip alias – ZyXEL Communications P-334 User Manual

Page 72

Advertising
background image

Prestige 334 User’s Guide

71

Chapter 5 LAN Screens

Figure 17 IP Alias

The following table describes the labels in this screen.

Table 14 IP Alias

LABEL

DESCRIPTION

IP Alias 1,2

Select the check box to configure another LAN network for the Prestige.

IP Address

Enter the IP address of your Prestige in dotted decimal notation.

IP Subnet Mask

Your Prestige will automatically calculate the subnet mask based on the IP

address that you assign. Unless you are implementing subnetting, use the subnet

mask computed by the Prestige.

RIP Direction

RIP (Routing Information Protocol, RFC1058 and RFC 1389) allows a router to

exchange routing information with other routers. The RIP Direction field controls

the sending and receiving of RIP packets. Select the RIP direction from Both/In

Only/Out Only/None. When set to Both or Out Only, the Prestige will broadcast

its routing table periodically. When set to Both or In Only, it will incorporate the

RIP information that it receives; when set to None, it will not send any RIP

packets and will ignore any RIP packets received.

RIP Version

The RIP Version field controls the format and the broadcasting method of the

RIP packets that the Prestige sends (it recognizes both formats when receiving).

RIP-1 is universally supported but RIP-2 carries more information. RIP-1 is

probably adequate for most networks, unless you have an unusual network

topology. Both RIP-2B and RIP-2M sends the routing data in RIP-2 format; the

difference being that RIP-2B uses subnet broadcasting while RIP-2M uses

multicasting. Multicasting can reduce the load on non-router machines since they

generally do not listen to the RIP multicast address and so will not receive the RIP

packets. However, if one router uses multicasting, then all routers on your

network must use multicasting, also. By default, RIP direction is set to Both and

the Version set to RIP-1.

Apply

Click Apply to save your changes back to the Prestige.

Reset

Click Reset to begin configuring this screen afresh.

Advertising