Zanussi DCS 12 W - Manual (Page 6)

The control panel
- 6 -
1 4 3 2
1 Temperature selector
55° - Button in
65° - Button out
2 Programme knob
To start the machine:
Turn the selector knob clockwise to the programme
start. The On/Off switch is built into the programme
timer. During the water heating process, the timer
is standing still. To isolate the dishwasher from the
mains completely, unplug it from the wall socket.
3 Indicator lamp
While the programme is in progress, the indicator
lamp is lit and it goes out when the programme has
finished.
4 Salt indicator lamp
The operating lamp indicates when the salt needs to be
replenished. The lamp may remain lit for one or more
programmes after refilling the salt container, this is
normal.
Wash phase
Rinse phase
Door lock
Press the handle down and open the door. Avoid opening
the door while the machine is running, steam and hot water
could escape from the machine which may cause an injury.
If the door is opened slightly after a completed programme
the dishes will dry faster.