5. menu adjustments/settings – 3M MP8750 User Manual

Page 14

Advertising
background image

3M 1999

3M

Multimedia Projector MP8750

9

Sub-Menu: Select the desired sub-menu (see Main Menu). Press the Disc Pad to the right or the Enter button to display the
sub-menu.

The sub-menu name (1) is on the top line.

A slider bar (2) at the right of a sub-menu line indicates
you can increase or decrease the value.

A number field (3) at the right of a sub-menu line
indicates that you can change it.

A check box field

at the right of a sub-menu line

indicates that you can toggle that value On/Off by
pressing the Enter button.

To change a slider bar value, it must be highlighted. Press the +/– button on the remote control or Bright +/– button on the
operator touch panel to increase or decrease the value.

To change a number field, press the Disc Pad up or down to highlight (select) the menu line (3). Then press the +/– button
on the remote control or Bright +/– button on the operator touch panel to increase or decrease the amount of the value.

4-5.

Menu Adjustments/Settings

The following charts lists all the menu items that can be adjusted along with the default settings.

Main Menu

Description / Action

Default
Setting

Picture

Display picture submenu

Audio

Display audio submenu

Tools

Display tools submenu

Source
(drop down window)

Select input source
(PC/RGB1 / PC/RGB2 / SVHS /
VIDEO 1 / VIDEO 2 / AUX)

According
to search
procedure

User Interface

Display user interface submenu

Advanced Setup

Display advanced setup submenu

Info

Display information window
(press Enter)

Picture (PC/RGB)

Submenu Items

Description / Action

Default
Setting

Height

Adjust projected image height

Brightness

Adjust the brightness

Contrast

Adjust the contrast

Optimize

Set best brightness for image

Hor. Position

Adjust horizontal position of image

Ver. Position

Adjust vertical position of image

Tracking

Adjust number of pixels per line

Sync

Adjust phase synchronization

Mode

Select data mode to adjust within this
menu (Predefined modes /
User Mode 1…3)

<Automatic>

Resolution
(drop down window)

Select pixel resolution (640x350 /
640x400 / 720x400 / 640x480 /
800x600 / 832x624 / 1024x768 /
1280x1024)

Picture

Height
Brightness
Contrast
Optimize
Hor. Position
Ver. Position
Tracking

1312

Sync
ModeVESA 1024 x 768 75Hz
Resolution

1024 x 768

(1)

(2)

(3)

Main Menu

Picture

Audio

Tools
Signal source PC/RGB1

User Interface

Advanced Setup

Info

Picture

Height
Brightness
Contrast
Optimize
Hor. Position
Ver. Position
Tracking

1312

Sync
ModeVESA 1024 x 768 75Hz
Resolution

1024 x 768

Advertising