3M H10 - Manual (Page 22)

22
This projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPUT, AUTO,
SCREEN, OPTION. Each of these menus is operated using the same methods. The basic
operations of these menus are as follows.
1
Press the MENU
button.
The menu display
appears on the screen.
2
Use the /
buttons to select
a menu , then
press the
or
ENTER button.
The display of the
selected menu
appears.
3
Use the / buttons to select an item,
then press the or ENTER button.
The operation display of the selected item appears.
4 Use the / buttons to operate the item.
When you want to reset the adjustment, press the RESET
button during the operation. Note that the items whose
functions are performed simultaneously with operating (ex.
LANGUAGE, WHISPER, H PHASE etc.) are not reset.
When you want to return to the previous display, press the
or ESC button.
[ex. Adjusting
VOLUME]
1. Press the MENU
button.
2.Use the /
buttons to select
the OPTION, then
press the
or
ENTER button.
3.Use the /
buttons to select
the VOLUME,
then press the
or ENTER
button.
4.Use the /
buttons to adjust
the VOLUME.
5.Press the MENU
button.
5
Press the MENU button, or do not perform
any operation for several seconds
.
The menu display disappears and your operation finishes.
MENU
RESET ESC
ENTER
VIDEO
ASPECT
MUTE
KEYSTONE FREEZE
MENU POSITION
ENTER
ESC RESET
VOLUME
STANBY/ON
MAGNIFY
AUTO BLANK
RGB SEARCH
OFF
ON
Using The Menu Functions
Multifunctional Settings