3Com 520 User Manual
Page 45
Setting Up a WAN Link
1-31
d
If you are routing, edit the Port IP address to set
it to
UNNUMBERED
or to a valid IP address for the
WAN link.
See
for more information about
using numbered and unnumbered links.
If you are bridging, leave this field at the default
setting.
e
If necessary, change any of the other parameters
to suit your WAN link. In most cases the defaults
can be used.
f
Press [CTRL]+[E] to submit this configuration.
The WAN port is now configured and provided the
remote unit’s WAN port has also been configured,
data will be passed across the link.
Enter
SAVE
at the command prompt to permanently
store this configuration in the unit’s memory.
Figure 1-15
Edit WAN Port Screen
Rc.bk : RC01.FRM Page 31 Thursday, July 10, 1997 9:53 AM