3M Dynatel M-Series - Manual (Page 15)

Again, the very important part in making the GPS device to communicate with the
Locator is to configure the serial ports correctly. Once all the connections are
established, you can verify the connectivity as follows.
Start the Job by clicking on the Locator-man Icon in Arcpad™ application
Locator-man Icon
on the Toolbar
3M Application scripts for ArcPad provide Job management capabilities. When
you start the scripts, you are prompted to Select an existing Job or create a new
Job. To create a new Job, type a name for the new Job and click “OK”. You will
be prompted to select a Map for the Job.
Figure 10. Starting 3M™ Application scripts in ArcPad™
Figure 11. Selecting existing / create new Job
15