3M 10008 - Manual (Page 2)

3M TM Fitting Instructions for 3M TM Elastomeric
Full Face 6 Strap Respirator
10008
page 2 of 2
Important
Before using these respirators,
you must determine the following:
1. The type of contaminant(s)
for which the respirator is
being selected.
2. The concentration level
of contaminant(s).
3. Whether the respirator can be
properly fitted on the wearer’s
face. Do not use with beards,
on other facial hair, or other
conditions that prevent a good
seal between the face and the
faceseal of the respirator.
4. Before use of these respirators,
a written respiratory protection
program must be implemented,
meeting all the requirements
of OSHA 29 CFR 1910.134,
including training, medical
evaluation and fit testing.
These respirators help reduce exposure to
certain airborne contaminants. Misuse may
result in sickness or death. Before use, the
wearer must read and understand User
Instructions provided as a part of product
packaging. Time use limitations may apply.
For proper use, see package instructions,
supervisor or call 3M OH&ESD Technical
Service in U.S.A., 1-800-243-4630. In Canada,
call 1-800-267-4414.
WARNING !
fax: (858) 488-6320 tel: (858)488-3300 [email protected] www.NBCsafety.com
World Leaders in Defense Technology
NBC Safety