Tech Note TT24 - Manual (Page 2)

2
Mackie TT24 Tech Note Wireless Remote Control
Procedure
1. Confi gure your TT24 and the host PC (see the TT Control installation
instructions on the CD supplied with your TT24).
2. Confi gure your wireless network for both your client and host PCs.
3. Enable the computer connected to the TT24 to be the Windows Remote
Desktop host. You must be logged on as an administrator or a member of
the Administrators group to enable Remote Desktop.
a. Open the System folder in Control Panel. Do this by clicking Start,
pointing to Settings, clicking Control Panel and then double-clicking
the System icon.
b. On the Computer Name tab, write down the name listed as the “Full
computer name;” you will need this later. (In the screen shot below,
the host PC is called “tt-test-speedy.”)