3M MP8740 - Manual (Page 9)

3M ™ Multimedia Projector MP8740 © 3M 1999
ENGLISH
INPUT
RGB1/2 VIDEO1/2
BLANK TIMER
MENU ON MOUSE ON
RIGHT
LASER
VOLUME
MUTE STANDBY/ON
ZOOM FOCUS
POSITION ON
RESET
STANDBY / ON button
Set main power switch to ON.
Press and hold STANDBY/ON button for
projector mode (lamp on) or standby
mode (lamp off).
ZOOM button
Press +/- to adjust image size.
Note: If needed, move projector
closer/further from screen.
FOCUS button
Press +/- to adjust image sharpness.
POSITION button
Press and light POSITION button.
Move DISK PAD to adjust horizontal/
vertical image position.
DISK PAD
Select mode, then move DISK PAD to
position image, navigate menus or control
mouse functions. To select the mode:
• Press and light POSITION button for
position mode.
• Press and light MENU ON button for
menu mode.
MENU ON button
Press and light MENU ON button to
display the Main Menu. Move DISK PAD
to select menu and/or adjust screen
values.
BLANK ON button
Press BLANK to display a blank
background with no image. Press again to
return the image to the screen.
INPUT buttons
RGB 1/2: Select computer video input
(RGB1
➔ RGB2 ➔ RGB1).
VIDEO 1/2: Select video inputs
(VIDEO1
➔ VIDEO2 ➔ VIDEO1).
MUTE button
Press MUTE to switch the audio
sound ON or OFF
VOLUME button
Press +/- to adjust internal/external speaker
volume.
LASER POINTER
Press and hold down button to project laser
pointer.
CAUTION
To prevent injury to eyesight, do not point
laser beam at other persons or look directly
into laser beam.
RESET / RIGHT MOUSE button
RESET: When a menu is being displayed,
press RESET to return menu value to factory
setting.
RIGHT MOUSE: When computer image is
being displayed, press for right mouse button
function.
MOUSE ON button
Press MOUSE ON button to activate mouse
mode. Move DISK PAD to control mouse
functions.
TIMER ON / OFF button
Press TIMER to display and start the timer as
set in OPT menu setting. Note: Timer will not
display on a blank screen. To remove TIMER
display press again.
2.4 Remote Control Transmitter Identification
Backside
of Remote
6
Figure 2.3 Remote Control Buttons
LEFT MOUSE
button
C A U T I O N
LASER RADIATION
DO NOT STARE INTO BEAM
WAVE LENGTH: 670 nm
MAX. OUTPUT: 1mW
CLASS II LASER PRODUCT
Battery Cover
(Use AA or LR6 batteries) Laser Aperture
AVIOD EXPOSURE-LASER
RADIATION IS EMITTED
FROM THIS APERTURE
LASER APERTURE