Printing transparencies from tray 1 (mpt) – Xerox Phaser 7750 Color Laser Printer User Manual
Page 2
Transparencies
Phaser® 7750 Color Laser Printer
2-49
Printing Transparencies from Tray 1 (MPT)
1.
Fan the transparencies to release sheets that may stick together.
2.
Insert the transparencies long-edge feed into Tray 1 (MPT).
Note
Do not load paper above the fill line inside the tray.
3.
Adjust the paper guides to the size of the transparencies.
Selecting Front Panel Settings to Print Transparencies
1.
At the printer’s front panel, do one of the following:
■
Press the OK button if both
Phaser 45-Series Transparency
and the correct
paper size are selected. Go to Step 4.
■
Select
Change
if a different paper type or incorrect paper size is selected, then press
the OK button. Go to Step 2.
2.
Select
Phaser 45-Series Transparency,
then press the OK button.
3.
Select the paper size, then press the OK button to save your selection.
4.
In the printer driver, select either the paper type or Tray 1 (MPT) as the paper source.
7750-097
7750-157
MAX