Olympus C-3020 Zoom - Manual

START
OLYMPUS OPTICAL CO., LTD.
San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan
Customer support (Japanese language only): Tel. 0426-42-7499 Tokyo
OLYMPUS AMERICA INC.
Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000
(Technical support) Tel. 1-888-553-4448 (Toll-free) (First 30 days after purchase)
Tel. 1-631-844-5520 (After 30 days)
(E-Mail) [email protected]
Olympus software updates can be obtained at: http://olympus.com/digital/
Adobe [Photoshop] Support
Adobe software updates and technical information can be obtained at:
http://www.adobe.com/support/
OLYMPUS OPTICAL CO. (EUROPA) GMBH.
(Premises/Goods delivery) Wendenstraße 14-18, 20097 Hamburg, Germany Tel. 040-237730
(Letters) Postfach 10 49 08, 20034 Hamburg, Germany
Our Hotline is available from 9 am to 6 pm (Monday to Friday)
E-Mail: [email protected]
«Olympus Web site» http://www.olympus.com
Using this camera for the first time
QUICK START
GUIDE
DIGITAL CAMERA
Thank you for purchasing an Olympus digital camera. This guide has been designed for
those who want to become familiar with the camera in a very short time. See the Reference
Manual for more details.
Checking the Package Contents
Camera
Strap
Lens cap with string
USB cable
AA (R6) alkaline batteries (4)
CD-ROMs with Windows 98 USB driver
software, Reference manual, and more.
Basic Manual
Quick Start Guide (this publication)
Software installation guide (included in
the CD-ROM package in some areas) Warranty/Registration card (North
America only)
Safety Precautions
SmartMedia (16 MB)
Static free case for SmartMedia
Labels for SmartMedia (2 pieces)
Write-protect seals for SmartMedia
(4 pieces)
SmartMedia Instructions
Loading the batteries
Attaching the strap
Pull the string
loop through
the hole in the
lens cap. 1
3
Put the strap through the string
loop.
Thread the strap through the
strap eyelet.
Loosen the strap in the stopper
beforehand to adjust the strap
length.
Thread the strap through the
stopper as indicated by the
arrows. When the strap length
is satisfactory, pull on the strap
to make sure it is securely
fastened.
4
5
Strap eyelet
2
3
4
5 Stopper
Attach the strap to the other
strap eyelet following steps
3 – 5. 6
Make sure the camera is turned off
(i.e. the mode dial is set to OFF).
1
Slide the battery compartment lock on
the battery compartment cover in the
direction of
.
2
Slide the battery compartment cover in the direction
of the arrow printed on it, using your fingertip. Using
a fingernail could result in injury.
Insert the batteries in
the direction shown
in the illustration.
5
When using LB-01 lithium battery packs When using AA (R6) batteries
4
3
Close the battery compartment cover, then press it
down and slide it in the opposite direction of the
arrow printed on it.
● When pressing the battery compartment cover shut,
be sure to press the center of the cover, as it may be
difficult to close properly by pressing the edge.
● Make sure the cover is completely closed.
Slide the battery compartment lock on the battery
compartment cover in the direction of
.
8
7
6
Inserting/ejecting the card
Make sure the camera is turned off
(i.e. the mode dial is set to OFF). 1
Open the Card cover. 2
Inserting the card
Insert the card fully with the contact area facing
towards the monitor side (back of the camera).
Insert until you feel the card locked into place.
● Note the orientation of the card. If it is inserted
incorrectly, it may become jammed.
Ejecting the card
Push in the card lightly to unlock it, then pull it
out.
Close the cover tightly.
3
3
4
Note:
● NEVER open the card cover, eject the card, remove the batteries, or disconnect the
optional AC adapter while the camera is in use or the camera is communicating
with a computer. Doing so could destroy all data on the card.
Taking still pictures
Full Automatic mode
Remove the lens cap and
set the mode dial to P. 1
Point the camera towards a subject while
viewing through the viewfinder. 2
To focus on the subject, press the shutter button
halfway, slowly and gently.
● When the subject is in focus, the green lamp lights up.
To start shooting, press the shutter button gently all
the way (fully).
● The green lamp and card access lamp blink and the
camera begins storing pictures on the card.
3
4
● To turn off the camera
Set the mode dial to OFF.
Card access lamp
Green lamp
Viewing still pictures
Quick View
Press the (monitor) button
twice quickly.
● The monitor turns on and the
recorded picture appears.
1 Display the desired pictures
using the arrow pad.
● Pictures indicated by are
movie frames. T See “Playing
back movies”.
2
Jumps to the picture
10 frames behind.
Displays the next picture.
Jumps to the picture
10 frames ahead.
Displays the
previous picture.
Turning the zoom
lever towards
T: Enlarges the
picture.
W: Displays multiple
pictures at the
same time.
To return to the shooting mode, press the shutter button halfway.
● The monitor turns off. You can now shoot pictures using the viewfinder. 3
Zoom lever
Recording movies
Movie mode
Press to display Menu. 2
Point the camera towards the
subject and compose the
picture while viewing through
the monitor.
Press Ñ to select
S-Prg.
Press ñ
repeatedly to
select
Movie.
3
DIGITAL ZOOM
S-Prg
MODE MENU
CANCEL CANCEL SELECT SELECT GO GO
S-prg 4
Viewfinder Orange lamp
6
Press the shutter button all
the way to start recording.
● The orange lamp lights up.
● The subjects are kept in focus
all the time during movie
recording.
Press the shutter button all
the way again to stop
recording.
● The card access lamp blinks
and the camera starts writing
the movie to the card.
● If you use up the remaining
seconds displayed, the
camera automatically stops
shooting and starts writing the
movie to the card.
7
8
AF target mark
Seconds remaining
Remove the lens cap and set the
mode dial to S-Prg. 1
Press . 5
Card access lamp
2
VT330501
C-3020 QSG.EN.p65 01.9.21, 4:46 PM 1