3M Series 56ZZ - Manual (Page 4)

3
WARNING
To reduce the risks associated with all residual hazards:
• Read, understand, follow and retain for future reference all safety statements in each applicable equipment owner’s
manual and refer to the applicable Material Safety Data Sheet & material container label for each material to be
sprayed before using your 3M equipment.
• This equipment is to be used only by professionals familiar with the possible applicable safety hazards.
• Do not use this product around unsupervised children.
• Never modify any part of this product.
• Always comply with local, state and national codes governing ventilation, fire protection, operation, maintenance,
housekeeping and disposal plus all safety statements in applicable owner manuals, MSDS and material container labels.
To reduce the risks associated with chemical exposure:
• Never point a spray gun at anyone else or place any part of your body in front of a spray nozzle.
• Check spray equipment for damage and proper function before use. Repair/replace worn, damaged or malfunctioning
components.
• Always wear appropriate, approved personal protective equipment for eye, skin, respiratory and hearing protection
per the applicable MSDS and material container labels at all times when spraying.
To reduce the risks associated with fire and explosion:
• Must maintain adequate ventilation per applicable MSDS and material container labels for each material being
sprayed in the work area.
• All ignition sources such as smoking must be kept out of the spray area.
• Always maintain a readily available, approved fire extinguisher or other approved fire fighting equipment in the spray area.
• Never use solvents containing Methylene Chloride and Trichloromethane for any reason to avoid a possible violent,
explosive chemical reaction when exposed to aluminum or zinc (refer to the manufacturer’s MSDS or contact material
supplier if there is any doubt to confirm compatibility).