Epson PC L-41 - Manual (Page 55)

Using PRINT Image Framer (P.I.F.) 55
To take a picture with a frame:
1. Turn the Mode dial to
automatic or manual mode.
2. Press the P.I.F. button. The first frame stored in the camera is displayed.
If you want to select a frame stored on the memory card, press the r button after pressing the P.I.F.
button.
3. Select the desired frame by using the u d buttons, then press the OK button.
4. The selected frame is displayed on the LCD monitor. You can now take the picture and center it in the
frame. (See Chapter 2, “Taking Photos,” for instructions.)
Adding or Changing Frames
You can change the frame after you take a photo in P.I.F. mode. You can also add a frame to a photo that
was taken without a frame.
1. Turn the Mode dial to
playback mode.
2. Display the desired photo to change or add a frame, then press the P.I.F. button.
If you want to switch to a frame on the memory card, press the r button.
3. Select a frame by using the u d buttons, then press the OK button.
To save the photo without a frame, select No Frame, then press the OK button.