3M S40C - Manual (Page 28)

SCREEN Menu
With the SCREEN menu, the two items shown in the Table below
can be performed.
Please perform each operation in accordance with the instructions
in the Table.
27
SCREEN Menu
Item Description
BLANK
Selection of BLANK Screen:
. . . . . .
The BLANK Screen may be voluntarily selected. The BLANK Screen is
displayed when the screen has been erased (i.e., made to vanish) by
manipulating the BLANK button (please refer to the “Temporarily Blanking the
Screen” section).
Option screens: Various colored non-patterned (plain) screens displayed
within the Menus.
START UP
Selection of START UP Screen:
TURN ON
TURN OFF
The START UP Screen may be voluntarily selected. The START UP Screen is
displayed when no signal has been inputted, or when spec signals are being
inputted.
TURN ON: Existing standard screens. Please make confirmation using the
actual screen(s).
TURN OFF: A non-patterned (plain) blue color screen.
• Note that if TURN OFF is selected the blank screen is displayed in blue when
there is no signal.
Example : SCREEN Menu
(BLANK)
MENU
: SELECT
MAIN
PICTURE-1
PICTURE-2
INPUT
SCREEN
OPTION BLANK
START UP