ACE Brand Products SMB-638 - Manual (Page 8)

7
Operation
TV Selection
Turn on the TV, the DVD player and the Audio Amplifer System (if any).
1. Press the “TV/VIDEO” button on the TV.
2. Select the Video Mode (TV).
Note: If there are more than 1 AV channel for the TV, select the channel you have
connected to the DVD player.
3. Select the Correct Audio Input on the AV Amplifier (if any).
Play Discs
1. Press the OPEN button (
) on the front panel and load the Disc on the tray. The
label side should be facing upwards. For a Double-sided DVD Disc, put the disc with
label A/1 up.
2. Close the disc compartment door to close the tray and the disc will be loaded.
3. The Disc will be played automatically.
• If it is a DVD disc, it will show the Menu/Title Page on the screen.
• If it is a CD, it will play the first track directly.
4. Press the STOP button ( ) if you want to stop the Disc playback. You can resume
playback by pressing the PLAY button and it will start at the location where you have
pressed stop (Resume Play).
5. Press the STOP button twice to have the Disc stop completely.
Pause
This function is applicable for DVD and CD audio.
•
For DVD, the picture will freeze.
• For CD audio, it will become muted.
1. Press the PAUSE button ( ) to pause play.
2. Press the PLAY button again to resume Play.
DVD Setup Mode
•
Setup Mode provides the menu for the configuration of General mode, Audio mode,
Video mode, Preference mode, Password etc.
• Item selection in the SETUP menu is done by using the Direction button and the
ENTER button.
• To exit the SETUP menu, press the SETUP button again.
• The initial password for PARENTAL Mode is set at 136900.
SMB638 2032.1.10, 3:17 AM Page 7 Adobe PageMaker 6.5C/PPC