3M 9000PD - Manual (Page 18)

18
3M™ Digital WallDisplay
© 3M 2005. All Rights Reserved.
Installation and System Setup
Hanging on the Wall
1. If possible, position the 3M Digital WallDisplay
and shipping tray in front of the wall where the
bracket is located. Position the unit so that the
projection arm is closest to the wall.
2. Clear the path from the unit to the wall where it
will be hanging.
Note: Most of the weight is at the projection head/
speakers end of the 3M Digital WallDisplay.
3. With one person holding each side of the unit,
carefully lift it into position so that the bracket slot
is above the wall bracket. Ensure that the unit is
securely in place before releasing.
4. Remove the tape from the projection arm.