3M PX5 - Manual (Page 13)

E-13
Operating
(1) Press the SELECT (
̆̄) buttons of the
Remote control and align the deep blue
cursor with [English].
(2) Press the ENTER button to set.
This will set language and [Menu Language
Select] will close.
This completes the selection of the dis-
play language.
Caution:
[Menu Language Select] will not appear the
next time the power is switched on.
The first time the power is switched on after purchase, [Menu Language Select] will be dis-
played. Follow the procedure described below and select the display language of the projec-
tor.
If the image is blurred, turn the focus ring counterclockwise or clockwise to focus it.
Should a sign not be output from the notebook computer, please try the operation described below.
Please see Page E-15 of the User’s Manual (CD-ROM Edition) for details.
Cursor
Manufacturer Model Key
DELL All computers Fn + F8
EPSON All computers Fn + F8
FUJITSU All computers Fn + F10
iiyama All computers Fn + F3
IBM All computers Fn + F7
NEC All computers Fn + F3
Panasonic All computers Fn + F3
SHARP All computers Fn + F5
SONY All computers Fn + F7
SOTEC All computers Fn + F3 – F5
TOSHIBA All computers Fn + F5
Victor All computers Fn + F10
Note: Table information is current to December 2003.
When [Menu Language Select] is Displayed Upon Switching On the Power
No projection when connected to a notebook computer