Foster 7316-000 - Manual (Page 13)

26
interrupts and will not resume until the objects are removed. The hob may not be used during this
operation.
WARNING!
Before each operation, disconnect the appliance from the mains electricity. Depending on the mains
voltage, the appliance must be connected according to the electrical diagram below. The protection
conductor (equipotential protection conductor) must be connected to the earthing clamp.
The connection wire must be fed through the bracket that protects it against accidental movements.
Once the connection is completed, turn on all the cooking zones for at least 3 minutes to verify their
operation.
The following wires can be used for the electrical connection:
• Type H05 RR-F rubber-coated cables with yellow/green wires.
• PVC type H05VV-F connection cables with yellow/green wires, or similar
cables.
Electrical
diagram