Programmable dc 3600 Series User Manual
Programmable dc Software
Advertising
Table of contents
Document Outline
- cover
- CONTENTS
- SAFETY GUIDE
- Attention
- Chapter 1 General Introduction
- 1.1 General Introduction
- 1.2 Specification
- 1.3 Features
- 1.4 Dimensions and Structure
- 1.4.1 Dimension
- 1.4.2 Structure
- 1.4.2.1 Front view
- 1.4.2.2 Back view
- Chapter 2 Operation
- 2.1 General operation
- 2.2 Function introduction
- 2.2.1. Main functions
- 2.2.2 Sub-functions
- 2.3 The operation of the function
- 2.3.1 Set up voltage
- 2.3.2 Set up current
- 2.3.3 Enable/disable the output
- 2.3.4 Store parameters
- 2.3.5 Recall parameters
- 2.3.6 The function of the Menu
- 2.3.6.1 Set up the maximum output voltage
- 2.3.6.2 Set up the maximum output power
- 2.3.6.3 Enable/disable the rotary knob
- 2.3.6.4 Set up initial output state
- 2.3.6.5 Save voltage setting
- 2.3.6.6 Set up the communication speed
- 2.3.6.7 Set up communication address (0~31)
- 2.3.6.8 Lock the keypad
- 2.3.6.9 Clear saved parameters
- 2.3.6.10 Exit
- Chapter 3 System Installation of PowerMS Software
- 3. 1 System Installation
- 3.2 System Start
- Chapter 4 The introduction of main functions
- 4.1 The Definition of the Power Supply
- 4.2 The COM Port and Lower Machine (Power Supply) Address Set
- 4.3 Start the Communication
- 4.4 Stop the Communication
- 4.5 Select POWER
- 4.6 Select PC to POWER Control Instructions
- 4.7 Set the Voltage Range
- 4.8 Set the Max Current
- 4.9 Query the Report
- 4.10 Explanation of the Interface Indicating Components
- 4.11 The State Bar
- 4.12 Power Supply State Indication
- 4.13 Exit the System