3Com WL-542 - Manual (Page 29)

Accessing the Setup Wizard 27
Setup Wizard -
Connection Type
Figure 14 Connection Type Screen
The Connection Type screen allows you to set up the Router for the type
of Internet connection you have. Before setting up your connection type,
have your account information from your ISP ready.
Select a DSL mode from the following:
■ PPPoE — PPP over Ethernet, providing routing for multiple PCs, see
page 28
■
PPPoA — PPP over ATM, providing routing for multiple PCs, see
page 29
■
Bridge Mode (for a single PC) — RFC1483 Bridged Mode, for single
PCs only, see
page 31
■ Routing Mode over ATM — RFC1483 Routed Mode, for multiple PCs,
see
page 32
■ Dynamic/Fixed IP in 1483 Bridge Mode (for multiple PCs), see page 33
and click Next.
For further information on selecting a mode see “Internet Settings” on
page 46 .