3M S15 - Manual (Page 39)

39
Multifunctional settings
Item Description
LAMP TIME
The lamp time is the time counted after the last resetting. It is shown
in the OPTION menu as the use time of the lamp. Performing this
item resets the time.
Pressing the RESET button on the remote control or the button ►
on the projector for about 3 seconds displays a dialog to make sure.
To perform reset, point at RESET using the button ▲.
RESET  CANCEL
• Please reset the lamp time only when you have replaced the lamp,
for correct messages about the lamp.
• About the lamp replacement, please see the section "Lamp"
(  41, 42).
FILTER TIME
The fi lter time is the time counted after the last resetting. It is shown
in the OPTION menu as the use time of the air fi lter. Performing this
item resets the time.
Pressing the RESET button on the remote control or the button ►
on the projector for about 3 seconds displays a dialog to make sure.
To perform reset, point at RESET using the button ▲.
RESET  CANCEL
• Please reset the fi lter time only when you have cleaned or
replaced the air fi lter, for correct messages about the air fi lter.
• About the caring the air fi lter, please see the section "Air fi lter"
(  43).
OPTION menu (continued)
LAMP TIME
0
RESET
CANCEL
FILTER TIME
0
RESET
CANCEL