3Com Palm V - Manual (Page 10)

Page 6 Setting Up And Using Your Palm V™ Modem
Attaching Palm V Modem and cables
Your modem has a 10-pin connector that slides into the grooves of
your organizer connector. Make sure your organizer snaps into place
onto the modem latch in the center of the modem.
You can use either the standard RJ11 cable to connect to an analog
phone line, or a wireless phone cable (available separately) to connect
to your cell phone.
Note: It is important to use a standard analog phone line, such as
those used in homes. If you use your modem in an office or
hotel, make sure it is connected to a phone line with a data
port, a fax line, or a modem line. If you use the wrong type of
phone line, your modem emits five beeps. Disconnect the
cable and try a different line.
Snap onto modem latch Slide into connector
Insert phone cable
latch