Private network settings, Local network - configuration page – 2Wire Gateway None User Manual
Page 87
Management and Diagnostic Console
82
Local Network - Configuration Page
The Local Network - Configuration page allows you to change the gateway’s default local network settings.
You must click the
Submit
button for changes to take effect.
Figure 33. MDC Local Network Configuration Page
Private Network Settings
By default, the gateway uses the 192.168.0.1/255.255.0.0 IP address range. The Private Network pane
allows you to change the IP address range used by the local network. You can choose from three standard
configuration options, or configure the network settings manually.
Note:
To access this page, your organization must have the Remote Management feature
enabled. If the feature is not enabled, an error message will display when you click the link to
access this page.