3M MicroTouch M170 - Manual (Page 33)

Rear Edge of
Base Not Shown
Front Edge
of Base
Drill 4 Mounting Holes
0.178" (4.5 mm) Dia.
Locking
Mechanism
Receptacle
0.21" (5.5 mm)
5.71" (145 mm)
3.74" (95 mm)
0.39" (10 mm)
0.70" (17.8 mm)
Place this template on mounting surface and drill four holes as shown for mounting screws.
The screw heads must be smaller than 0.39" (10 mm) and larger than 0.21" (5.5 mm).
Adjust height of screw heads to securely lock monitor in place. This height is about 0.178" (4.5 mm).
M170 Base Plate Mounting Template
( Drawn actual size)
3M Touch Systems Proprietary Information
3M Touch Systems Proprietary Information