Sony SLV-PH88EE - Manual (Page 8)

Getting Started 10
1
Press ON/STANDBY to turn on the unit.
2
Turn on your TV and select a programme position for video
playback.
Choose a channel between UHF 30 and 39 on the TV where there is
no picture and no sound or only a steady rustling sound.
This channel will now be referred to as the video channel.
3
Insert a tape recorded in the colour system matching your TV into
the cassette compartment.
The unit starts playing automatically if you insert a tape with its
safety tab removed.
4
Press · PLAY on the unit.
5
Tune the TV until the video playback picture is clearly displayed on
the TV screen.
Refer to your TV manual for tuning instructions.
You have now tuned your TV to the unit. From now on, whenever
you want to play a tape, set the TV to the video channel.
If the playback picture does not appear clearly, see “To obtain a clear
playback picture” on page 9.
Step 4
Tuning your TV to the unit
If you have connected your VCR to the TV using the audio/video cable, skip
this step.
ON/STANDBY
REC
ON/STANDBY