Edimax Technology PT-31W - Manual (Page 7)

6
ACCESSING THE NETWORK CAMERA’S MANAGEMENT INTERFACE
By default, the network camera automatically obtains an IP address from the
DHCP server on your local network. Check your DHCP server’s IP address lease
table to find the network camera’s IP address, or use the EdiView Finder utility
included in the CD.
1. Insert the CD into your CD-ROM drive. When the wizard appears, click
“Setup Utility” to install the “EdiView Finder” software.
Note: The contents of the CD-ROM can also be downloaded from the
Edimax website: http://www.edimax.com/en/index.php
Note: We recommend that you use Microsoft Windows to install your
network camera - Mac is not supported.