Edimax Technology NVR-4 - Manual (Page 32)

31
You can define the recording schedule here. Each box represents an hour of a weekday,
camera will record only when corresponding box is checked.
All boxes are checked by default, and you can check the weekday box under weekly (all) to
check all 0-23 hours in a weekday automatically.
If you want to define a record job in the future, click ‘Job’ tab:
You can make a pre-defined recording job here:
You can setup up to 5 recording jobs here. You must define the starting date / time (under
‘From’), and ending date / time (under ‘To’). To enable a job, the box under ‘Job’ must be
checked.
When you finish, click ‘Apply’ button.
2.7.2 Storage Setup
You can configure NVR’s storage space here. This NVR supports up to 2 internal hard drives,
and USB flash drives.