Yamaha DVD-S530 - Manual (Page 18)

14
Operation
Subtitles
1 Select Z in the menu bar or press SUBTITLE
on the remote control directly.
2 Press SUBTITLE or 3/4 repeatedly to select the
different subtitles.
Special VCD & SVCD Features
Playback Control (PBC)
1 Load a Video CD with PBC and press PLAY.
2 Go through the menu with the buttons indicated
on the Video monitor until your chosen passage
starts to playback. If a PBC menu consists of a list
of tracks, you can select a track directly.
3 Enter your choice with the numeric buttons.
4 Press RETURN/RESUME to go back to the
previous menu, if applicable on the menu.
5 You may also select PBC off under Personal
Preferences.
➜ When set to off, PBC menus are not
activated for further playback.
Note:
When PBC is on, you cannot operate resume,
shuffle, repeat, A-B repeat, scan, time search and
FTS.
Special CD & MP3 Features
CD text and MP3 text
1 Some CD or MP3-CD discs may contain text
information (eg. track name, album name, artist
name etc.) which will appear on the front display
and video monitor during playback.
2
By default, CD text display is set to ON.
3
To switch off the CD text display, press CD
TEXT/BIT RATE during playback.
4
Press CD TEXT/BIT RATE again to switch on the
text display mode.
General Features
Note:
– Unless stated, all operations described are
based on remote control use. Some operations can
be carried out using the menu bar on the Video
monitor.
Moving to another title/chapter
DVD VCD
When a disc has more than one title/track or
chapter, you can move to another title/chapter as
follows:
1
Press ON SCREEN, then select W or X in the
menu bar.
2
Press 34 or numeric buttons to select a title/
chapter.
CD
1 Press T or S briefly during playback to go
to the next track or to return to the beginning
of the currect track respectively.
2 Press S twice briefly to step back to the
previous track.
3 To go directly to any track, enter the track
number using the numeric buttons.
Note:
– Long press of the T or S will switch on
backward or forward search (see serch section).
Search
DVD VCD
1 Select in the menu bar and press 4.
2 Use 1/2 to select the required speed: –32, –8 or
–4 (backward), or +4, +8, +32 (forward).
3 Select 1 or press PLAY to play the disc at normal
speed again.
● To exit the search mode, press 3.
(Playback continues at the selected speed.)
CD
● To search forward or backward through different
speeds, you can also hold down T or S
for more than two seconds.