Leadtek Teradici APEX 2800 - Manual (Page 8)

3
Install the virtual machine driver
Install the APEX 2800 virtual machine driver on each virtual machine.
1. Power up the virtual machine.
2. Open a console window to the virtual machine from vSphere client.
3. Run the apex2800-version-xxxxxx.exe installer on the virtual machine and follow the
steps that appear.
(Note: This package must be installed from VM's Console in the vSphere client — it
cannot be installed from within a PCoIP session to the virtual machine.)
4. After the installation completes, choose to reboot the machine later.
Make sure to power the virtual machine off and back on again. This
ensures that ESXi will inspect the updated virtual machine image.
IMPORTANT
4
Verify global policies settings
1. Verify global policies settings in View Connection Server:
Make sure that PCoIP hardware acceleration is enabled in the Global Policies, if any
policies inherit from it.
In any custom policies, make sure the option for enabling and disabling PCoIP
hardware acceleration is set to Allow.
Ÿ
Ÿ
5
English