Milwaukee M12 HJ Camo2 - Manual (Page 2)

2 3
M12 HJ M12 HJ Black M12 HJ Camo2
..........................6 h ..........................6 h .......................... 6 h
..S/M/L/XL/XXL/XXXL ..S/M/L/XL/XXL/XXXL ..........L/XL/XXL/XXXL
...................Li-Ion .....................Li-Ion ..................... Li-Ion
........................12 V ........................12 V ........................ 12 V
.....................1,27 kg ...................1,39 kg
.....................1,32 kg ...................1,44 kg
.....................1,33 kg ...................1,45 kg .................... 1,45 kg
.....................1,35 kg ...................1,53 kg .................... 1,53 kg
.....................1,48 kg ...................1,57 kg .................... 1,57 kg
.....................1,57 kg ...................1,67 kg .................... 1,67 kg
WARNING! Read all safety warnings and all
instructions, including those given in the accompanying
brochure. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
Do not use this heated jacket with an infant, child, a helpless
person, or anyone insensitive to heat, such as a person with
poor blood circulation.
Never use if inner liner is wet.
Heating elements are not recommended to touch bare skin.
Shut off power immediately if discomfort occurs.
Do not allow the cords to be pinched.
If improper operation of this heated jacket is observed,
discontinue its use immediately and contact a MILWAUKEE
service facility for repair.
Do not use pins. They may damage the electric wiring.
Disconnect and remove battery pack and battery holder
from battery holder pocket before washing.
Do not dry clean. Do not use drycleaning fluid on this heated
jacket. Do not bleach. Cleaning solvents may have a
deteriorating effect on the insulation of the heating element.
Hand wash, hang dry. Do not wring. Do not machine wash
or machine dry even though machine may include a hand
wash or equivalent cycle as an electric shock or fire may
result.
Do not iron.
Maintain labels and nameplates. These carry important
information. If unreadable or missing, contact a
MILWAUKEE service facility for a free replacement.
Do not dispose of used battery packs in the household
refuse or by burning them. Milwaukee Distributors offer to
retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects
(short circuit risk).
Use only System Milwaukee 12 V chargers for charging
System Milwaukee 12 V battery packs. Do not use battery
packs from other systems.
Never break open battery packs and chargers and store
only in dry rooms. Keep dry at all times.
Battery acid may leak from damaged batteries under
extreme load or extreme temperatures. In case of contact
with battery acid wash it off immediately with soap and
water. In case of eye contact rinse thoroughly for at least 10
minutes and immediately seek medical attention.
No metal parts must be allowed to enter the battery section
of the charger (short circuit risk).
SPECIFIED CONDITIONS OF USE
The heated jacket may be used for warming up the body in
cold environments.
Do not use this product in any other way as stated for
normal use.
ENGLISH
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is
in conformity with the following standards or standardized
documents. E N 60335, EN 55014-1, EN 55014-2, in
accordance with the regulations 2011/65/EU (RoHs),
2004/108/EC, 2006/95/EC
Winnenden, 2012-08-23
Rainer Kumpf
Manager Product Development
Authorized to compile the technical file
BATTERIES
New battery packs reach full loading capacity after 4 - 5
chargings and dischargings. Battery packs which have not
been used for some time should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the
performance of the battery pack. Avoid extended exposure
to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept
clean.
For an optimum life-time, the battery packs have to be fully
charged, after used.
To obtain the longest possible battery life remove the battery
pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C
and away from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
OPERATION
If the heated jacket does not start or operate properly with a
fully charged battery pack, clean the contacts on the battery
pack. If the heated jacket still does not work properly, return
the heated jacket, charger and battery pack, to a
MILWAUKEE service facility for repairs.
ENGLISH
TECHNICAL DATA Heated Jacket
Run time ......................................................................approx.
Size..........................................................................................
Battery .....................................................................................
Battery voltage.........................................................................
Weight according EPTA-Procedure 01/2003
S ...........................................................................................
M ...........................................................................................
L ............................................................................................
XL .........................................................................................
XXL .......................................................................................
XXXL .....................................................................................
OVERVIEW
Battery Holder pocket
Power cable
Battery holder
M12 HJ Black:
USB Port
Power Button
To turn on, press and hold the heated jacket power button
(about 1 second).
M12 HJ Black, M12 HJ Camo2:
Temperature setting can be adjusted at any time by
pressing the heated jacket power button. Each press will
cycle through the heated jacket’s temperature settings.
High Temp: red LED continuous
Medium Temp: white LED continuous
Low Temp: blue LED continuous
To turn off the heated jacket, press and hold the heated
jacket power button until the LEDs turn off (about 3
seconds).
If the heated jacket turns off unexpectedly, check
connections and charge the battery pack.
Power cable port
Fuel Gauge
100 %
75 %
50 %
25 %
M12 HJ Black:
USB power button