Setting up your display – Apple LED Cinema Display User Manual
Page 8
8
English
Setting Up Your Display
Follow these steps to set up your Apple LED Cinema Display:
1
Remove the protective film from the display and cables.
2
Insert the power cord into the display, and then insert the AC plug into a grounded
power outlet.
3
Connect the Mini DisplayPort cable to your computer, as shown below.
4
Connect the USB cable to your computer to use the display’s built-in iSight camera,
speakers, microphone, and USB ports.
5
Plug the MagSafe connector into the MagSafe power port on your computer to charge
the battery and provide power to your computer.
6
Press the power button on your computer to start it up. The display turns on
automatically when you start up your computer.
Apple LED Cinema Display
Mac portable
Mini
DisplayPort
MagSafe
USB
Power
outlet