Optical s/pdif out connector, Ieee 1394a port, Rj-45 lan port – GIGABYTE GA-MA790GPT-UD3H User Manual

Page 22: A. dual display configurations, B. playback of hd dvd and blu-ray discs

Advertising
background image

Hardware Installation

- 22 -

Activity LED:

State

Description

Blinking Data transmission or receiving is occurring
Off

No data transmission or receiving is occurring

Connection/Speed LED:

State

Description

Orange

1 Gbps data rate

Green

100 Mbps data rate

Off

10 Mbps data rate

Activity LED

Connection/

Speed LED

LAN Port

Optical S/PDIF Out Connector

This connector provides digital audio out to an external audio system that supports digital optical audio.
Before using this feature, ensure that your audio system provides an optical digital audio in connector.

IEEE 1394a Port

The IEEE 1394 port supports the IEEE 1394a specification, featuring high speed, high bandwidth and
hotplug capabilities. Use this port for an IEEE 1394a device.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following de-
scribes the states of the LAN port LEDs.

A. Dual Display Configurations:

This motherboard provides three ports for video output: DVI-D, HDMI and D-Sub. The table below shows the
supported dual display configurations.

• When removing the cable connected to a back panel connector, first remove the cable from your

device and then remove it from the motherboard.

• When removing the cable, pull it straight out from the connector. Do not rock it side to side to

prevent an electrical short inside the cable connector.

B. Playback of HD DVD and Blu-ray Discs:

In order to get better playback quality, when playing the HD DVD or Blu-ray discs, refer to the recommended
system requirements (or better) below.
• Memory: Two 1 GB DDR3 1066 MHz memory modules with dual channel mode enabled
• BIOS Setup: At least 256 MB of UMA Frame Buffer Size (refer to Chapter 2, "BIOS Setup," "Advanced

BIOS Features," for more information)

• Playback software: CyberLink PowerDVD 8.0 or later (Note: Please ensure Hardware Acceleration is

enabled.)

• HDCP compliant monitor(s)

Combination

Supported or Not

DVI-D + D-Sub

Yes

DVI-D + HDMI

No

HDMI + D-Sub

Yes

Dual
Display

Advertising