Parrot ASTEROID Mini - Manual (Page 26)

26 English
26 English
Area Network) Bluetooth profiles, the
Bluetooth connecting your phone to the
Parrot ASTEROID Mini will allow for
sharing of the phone's 3G connection.
1. Connect your phone to the Parrot
ASTEROID Mini via Bluetooth.
2. On the Parrot ASTEROID Mini,
select Settings > Network >
Bluetooth > Configuration .
3. Select your APN (Access Point
Name) from the suggested list, then
check
Select .
4. Press the button and select
Connect .
5. Allow connection sharing on your
phone. This procedure will vary
according to your phone model.
Sharing a phone 3G connection via USB
Note: Refer to the compatibility page of our
website to check if your phone allows 3G
connection sharing via USB and to consult
the
corresponding procedure :
www.parrot.com/uk/compatibility.
1. Make sure that your phone’s keypad is
unlocked.
2. Connect the phone to the Parrot
ASTEROID Mini using a USB cable/
micro-USB and the USB extension
cable provided with the Parrot
ASTEROID Mini. This connection
also enables you to recharge your
phone’s battery.
3. Select your APN (Access Point
Name) from the suggested list, then
check the
Select option. You can then
modify this setting by selecting
Settings > Mobile Networks settings
> Mobile Access device
.
> A pop-up indicating that USB
connection sharing has been activated
will appear.
ASTEROID Market : Using the applications
Several types of applications are available
with the ASTEROID Market : music,
geolocation, driver assistance...
27 English
All applications may not be available in all
countries. The use of some applications
may need prior subscription.
The Parrot ASTEROID Mini is a
multitasking device: several applications
can run simultaneously. For example, you
can listen to a Webradio station and use a
driver assistance application at the same
time.
For more information about installing and
using the available applications, refer to
the ASTEROID Market web page :
www.parrotasteroid.com/
asteroidmarket
.
Troubleshooting
Before you begin
Make sure the “Goodbye” message is
displayed on the Parrot ASTEROID Mini
screen when you turn the ignition off.
Refer to the Checking the wiring section
for more information.
Reset the Parrot ASTEROID Mini. To do
so, select
Settings > Advanced settings >
Restore factory settings .
Make sure you have the latest software
update on your Parrot ASTEROID Mini. To
do so, select
Settings > About > Device
Version . Compare this number with the
one on the Parrot ASTEROID Mini support
page on our website www.parrot.com.
Problems while using the phone function
Make sure your phone is compatible with
the Parrot ASTEROID Mini. To do so,
refer to the compatibility page on our
website
: www.parrot.com/uk/
compatibility.
If your phone is compatible with the
Parrot ASTEROID Mini and if you
already have the latest software update:
1. Delete the pairing on the Parrot
ASTEROID Mini. To do so, tap
Settings > Advanced settings >
Factory settings
.
2. On your phone, erase the Parrot