SoundMax SM-CMMD7001 - Manual (Page 24)

24
TV operations
Connect a TV antenna to the TV antenna jack of the unit. Select TV mode.
Select TV mode, then press PLAY/PAUSE button on the RC or front panel, or touch the screen, then touch
TV MENU item to show the TV Menu. To select a menu page (Auto Program or Manual Program) press
UP/DOWN cursor buttons on the RC or touch these items on the screen. To enter the selected page press
ENTER button on the RC. Press UP/DOWN cursor buttons on the RC or touch the needed item on the
screen to select an item, and then press ENTER button on the RC or press the item on the screen to
adjust the setting. Touch BACK item on the screen or press PLAY/PAUSE button on the RC or front panel
to return to previous menu page. When you touch the screen, a menu appears in which you can touch
and
icons to adjust the monitor tilt.
AUTO PROGRAM
System: select TV system (SECAM/NTSC/PAL).
Audio: select sound system (DK/BG/I). For PAL/NTSC systems M/N sound system is available as well.
Search: select to start automatic search and storing of TV channels.
MANUAL PROGRAM
Storage: select the storage number of the channel.
System: select TV system (SECAM/NTSC/PAL).
Audio: select sound system (DK/BG/I). For PAL/NTSC systems M/N sound system is available as well.
Channel: Select the number of the channel.
Fine: perform fine tuning of picture quality.
Memory: select on (memorize the found channel) or off (not memorize).