SoundMax SM-CCR3036 - Manual (Page 17)

17
USB/SD/MMC operations
Connecting a USB-device/Memory card
Insert a USB device into the USB port of this unit. Or insert an SD/MMC memory card until a click into the
memory card slot. To remove the card, press it until a click, then pull to remove.
Note: USB/SD/MMC supported capacity: up to 16 Gb.
For correct and satisfactory operation, licensed SD/MMC memory cards of famous brands should be used
with this unit. Avoid using memory cards of unknown brands. Some models of USB devices cannot be
supported by this unit due to incompatibility.
Playback
When a USB or a memory card is first connected, playback will begin automatically.
Depending on the number of files and folders, the device may take several seconds to begin playback. If no
MP3/WMA files are detected, “USB” or “SD” will be displayed.
Track select
Press NEXT button to skip to the beginning of the next track. Press PREVIOUS button to skips to the
previous track.
Press F/PS button; track number will blink on the display. Rotate VOLUME knob to select the track
number. Press SELECT button to confirm your selection.
Folder select
Press 5/FOLDER- button to select the previous folder. Press 6/FOLDER+ button to select the next folder.
Fast forward/rewind
Press and hold PREVIOUS or NEXT button to rewind or fast forward the current track.
Pause
Press 1/PLAY/PAUSE button to temporarily stop file playback. Press it again to resume playback.