SoundMax SM-CSP10 - Manual (Page 4)

4
If unit fails to operate properly
Carefully read the instruction to make sure the unit is being operated properly. Check the
following before you take your unit to the local dealer for repair.
SYMPTOM POSSIBLE CAUSE SOLUTION
The volume control regulator set
in the minimal position
Adjust sound level No sound
The audio cassette receiver is
damaged Take your unit to the local dealer for
repair
Acoustic system cables are
connected without observance of
polarity (+ or -) Check to see that all the power and
speaker leads are securely connected
Damage speaker wire or speaker Replace the speaker or speaker wires
Unnatural sound
The audio cassette receiver is
damaged Take your unit to the local dealer for
repair