SoundMax SM-CMD3008 - Manual (Page 17)

17
COLOR1 (green button backlight) and COLOR2 (red button backlight). After you have reached your desired
effect, leave the unit idle in order for the new setting to take effect.
TFT on/off
Press POWER/TFT OFF button on the panel to switch the TFT display off. Press the button again to switch the
display on.
Subwoofer
Press repeatedly SELECT button on the panel or SEL button on the RC until the display shows SUB ON (SUB
OFF). Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to select between SUB
ON/SUB OFF. Or press and hold BND/NP/SUB button on the panel to switch on or off the subwoofer output.
After you have reached your desired effect, leave the unit idle in order for the new setting to take effect.
Note: An external amplifier is required to operate the subwoofer.
AUX in jack
AUX-in jack is intended for connecting external audio equipment to amplify the sound. If connection is made
correctly, the audio signal from the external source will be translated through the acoustics of the head unit.
This enables to adjust the volume and quality of the sounding. For example, you can connect an MP3-player
to listen to tracks using the car acoustic system.