SoundMax SM-CCR3034 - Manual (Page 14)

14
Radio operations
Band selection
Press repeatedly LOUD/BAND button to select your desired radio band in radio mode: FM1, FM2, FM3, FM4
(OIRT), MW1 (AM1), MW2 (AM2). Each band can store up to 6 preset stations, for the total of 36 preset
memory stations.
Tuning
Press PREVIOUS or NEXT button; the unit will automatically search a nearest station with a strong signal
down or up the range and it stops when finds a station. To search next station, repeat this procedure. To
stop the automatical search, press PREVIOUS or NEXT button.
Press and hold PREVIOUS or NEXT button until MANUAL is displayed. Then press PREVIOUS/NEXT buttons
to change the frequency manually step by step.
Automatic store/Scan
Automatic store: Press and hold AMS/SCH button, the receiver will automatically find and save 6 strong
signal stations for the current subband.
Scan: Press AMS/SCH button once to scan the saved stations in each subband of the current band.
Programming stations
There are 6 numbered preset buttons, under which you can store and recall stations for each band. Select the
needed station, then press and hold a preset button. The station will be saved in the memory under the
corresponding number. To recall a stored station, press the corresponding preset button.
Mono/Stereo control (in FM radio mode)
Press repeatedly SELECT button until the display shows STEREO (MONO). Rotate VOLUME regulator to select
between STEREO or MONO. STEREO means stereo reception of the signal; MONO means mono reception mode.
Improvement of reception of distant stations can be done by selecting mono mode, which may cut down some
reception noise.