SoundMax SM-CDM1044 - Manual (Page 14)

14
Equalizer setting
Press and hold SELECT button; then press it repeatedly until DSP OFF (DSP ON) is displayed. Rotate VOL
regulator to choose between sound effects: POP M => ROCK M => CLASSICS => FLAT => DSP OFF.
BEEP function
Press and hold SELECT button; then press it repeatedly until BEEP OFF (BEEP ON) is displayed. Rotate VOL
regulator to select one of the following:
BEEP OFF – beep sound is not heard when a button is pressed
BEEP ON – beep sound is heard when a button is pressed
Reset function
RESET button is pressed with either a ballpoint pen or thin metal object. RESET function is to be activated for
the following reasons:
Initial installation of the unit when all wiring is completed.
All the function buttons do not operate.
Error symbol on the display.
AUX in jack
AUX-in jack is intended for connecting external audio equipment to amplify the sound. If connection is made
correctly, the audio signal from the external source will be translated through the acoustics of the head unit.
This enables to adjust the volume and quality of the sounding. For example, you can connect an MP3-player
to listen to tracks using the car acoustic system.