TELEFUNKEN TF-MID702G - Инструкция (Страница 4)

Before you start
4
Before you start
• Keep the power adapter out of the reach
of children.
• Do not insert connector plugs into ports
with force. If a plug can not be easily inserted
into the port, maybe the connector and port
do not match. Make sure that the connector
matches the port and the connector is aligned
with the port.
LCD
Liquid-cristal isplay (LCD) is a delicate
device that requires careful handling.
• Do not touch the screen with sharp objects.
• Do not exert strong pressure on the
screen and do not place any objects on it. This
can cause damage to the display and failure of
the device.
• Do not expose the display to direct
sunlight.
Cleaning and maintenance
• Before cleaning the device, make sure it
is switched off.
• To clean the LCD screen and casing of
the device use a soft cloth, special tissue and
special cleaners. Do not use aerosol sprays,
solvents, alcohol or abrasives.
The manufacturer reserves the right to
make changes in specifications, appearance,
contents of SW and equipment of the goods
unilaterally, without prior notice.
Utilization of the product
If you want to dispose this product, do not
mix it with general household waste. There is a
separate collection system for used electronic
products in accordance with legislation that
requires proper treatment, recovery and
recycling.
Please contact your local authorities for
the correct method of disposal. By doing so,
you will ensure that your disposed product
undergoes the necessary treatment, recovery
and recycling and thus prevent potential
negative effects on the environment and
human health.
Battery
Connect the power adapter to the electric
supply network and insert the adapter plug
into the power connector of the device.
While charging the process is displayed as
an additional “lightning” symbol in the power
icon: . We recommend not to disconnect the
device until the battery is fully charged. When
the battery is fully charged, the power icon on
the screen will be completely filled.
In order to maintain efficiency and
prolong the battery life, follow the instructions
described below:
• Before first use, it is recommended to
attach the device to the electric mains for 8-12
hours to fully charge the battery.
• Do not charge the device at high
temperature.
• Do not recharge the device too often: you
can do this at a time when the display shows a
low level of charge.
• If you are not using the device for a long
time, recharge the battery at least once in two
weeks, do not wait for the moment of complete
discharge.
5