Echo DHC-30 - Manual (Page 2)

DHC-3000
SERVICE INFORMATION
2
Minimum cutter speed* at no load
Strokes per minute 1850
Cutter clearance mm(in) 0.2 (0.008)
(See NOTE on page 3)
1-2 Technical data
1 SERVICE INFORMATION
1-1 Specifications
Dimensions* Length mm(in) 1025 (40.4)
Width mm(in) 240 (9.4)
Height mm(in) 160 (6.3)
weight Without battery pack kg(lb) 3.2 (7.1)
With battery pack kg(lb) 9.5 (21.0)
Motor Type DC magnet motor
Voltage V 12
Circuit Type Bimetal type
protector
Breaking capacity V - A DC 50 - 20
Handle Type Front Rubber grip with hand guard
Rear Plastic grip with integrated control (Trigger type ON/OFF
switch, Switch lockout, and Circuit breaker reset button)
Gear Type Spur
Reduction ratio 5.88
Lubrication Lithium based grease every 10 hours of use
Cutter Type Dual action, single-edged
Length mm(in) 750 (29.5)
Knife pitch mm(in) 35.0 (1.38)
Knife edge length /height mm(in) 22.0 (0.87)
Knife thickness mm(in) 2.5 (0.098)
Lubrication Apply oil daily
Blunt height mm(in) 35 (1.4)
Battery Type Back pack, lead-acid sealed
pack
Voltage V 12
Capacity Ah 17
Weight kg(lb) 6.3 (13.9)
Fuse type Cartridge (Glass tube)
Fuse quantity 1
Voltage/Ampere rating, fuse V - A DC 32 - 30
Fuse dia. - length mm(in) 6.4 - 32 (0.25 - 1.18)
Battery Input AC 120V 60Hz 20W
charger
Output DC 12V 0.9A