Enermax Platimax EPM850EWT - Manual (Page 4)

2
ENERMAX Platimax Series Power Supply Specification
EPM500AWT EPM600AWT EPM750AWT EPM850EWT
AC Input Voltage
100-240VAC, 50-60Hz
(Maximum range: 90-265VAC, 47-63Hz)
AC Input Current 6.5 – 3A 8 – 3.5A 9 – 4.5A 11 – 5A
DC OUTPUT
Rated Combined Rated Combined Rated Combined Rated Combined
3.3V 0-20A 0-20A 0-24A 0-24A
5V 0-20A
100W
0-20A
100W
0-24A
120W
0-24A
120W
12V1 0-25A 0-25A 0-25A 0-30A
12V2 0-25A 0-25A 0-25A 0-30A
12V3 0-25A
492W
(41A)
0-25A
600W
(50A)
0-25A 0-30A
12V4 - - - - 0-25A
744W
(62A)
0-30A
840W
(70A)
-12V 0-0.5A 6W 0-0.5A 6W 0-0.5A 6W 0-0.5A 6W
5Vsb 0-2.5A 12.5W 0-2.5A 12.5W 0-3A 15W 0-3A 15W
Total Power 500W 600W 750W 850W
Peak Power* 550W 660W 825W 935W
PROTECTION CIRCUIT
DC Rail OCP trigger range
3.3V 30 – 40A
5V 30 – 40A
Over Current
Protection
12V
30 – 40A(EPM500AWT / EPM600AWT);
35 – 45A(EPM750AWT / EPM850EWT)
DC Rail OVP trigger range
3.3V 3.7-4.1V
5V 5.7-6.5V
Over Voltage
Protection
12V 13.1-14.5V
DC Rail UVP trigger range
3.3V 2.0 – 2.4V
5V 3.3 – 3.7V
(DC) Under
Voltage
Protection
12V 8.5 – 9.5V
Over Power Protection Activated when output power > 120 ~150% of rated max load.
Over Temperature
Protection
Activated when PSU heat sink > 90 ~ 120 o C.
Short Circuit Protection Activated when any DC rails short-circuited.
ENVIRONMENT
Temperature
Operation ambient: 0~50 o C (for full rated output)
Storage ambient: -40~70
o
C
Humidity
Operation: to 85% relative humidity, non-condensing
Storage: to 95% relative humidity, non-condensing
OTHERS
Cooling One 13.9cm twist bearing fan, speed auto controlled.
MTBF
> 100,000 hours at 70% of full rated load, 230VAC/50Hz, 25
o
C
(MIL-HDBK-217F standard)
Dimension
150(w) x 86(h) x 160(d) mm (EPM500AWT / EPM600AWT)
150(w) x 86(h) x 175(d) mm (EPM750AWT / EPM850EWT)
Weight
2kg (without modular cables)±50g (EPM500AWT / EPM600AWT)
2.9kg(without modular cables)±50g (EPM750AWT / EPM850EWT)
Safety UL/cUL(Level 6), TUV, GOST, CB, BSMI
EMC CE, FCC, KCC
* Peak power may last up to 60 seconds