Binatone SI-2510 - Manual (Page 5)

5
ENGLISH
SPECIAL SAFETY MEASURES
Do not leave the iron unattended when it is
connected to a mains supply outlet. Always switch
the iron off even when you leave the room for short
periods of time.
Do not leave the hot iron in a horizontal position:
place it upright on a heat resistant surface.
The iron gets very hot when in operation: any skin
contact with metal surfaces, vapor or water may result in burns.
During operation of the appliance keep children away from it
especially when steam ironing.
Never iron or steam iron articles being worn by a person.
Avoid any contact between the sole plate and the plastic fittings of
an article: buttons, zippers, labels, etc.
Always disconnect the iron from the mains supply when filling or
draining the water tank.
Store the iron in a vertical position to avoid damaging the sole
plate.
The iron should always be connected to a grounded main electricity
supply.
DESCRIPTION OF
COMPONENTS
1. Casing
2. Non-slip handle
3. Water inlet opening
4. Water tank cover
5. Water tank with maximum limit mark
6. Spray nozzle
7. Spray button
8. Burst of steam button (turbo steam,
burst of steam in a vertical position)
9. Steam control knob
10. Temperature control knob
11. Operation indicator
12.Iron sole plate
13.Power plug
14.Power cord
15.Measuring jug
BEFORE USE
Remove all packaging from the appliance.
Turn the steam control knob (9) into the “0”
position, and the temperature control knob (10)
— into the “Min” position.
If you intend to iron with spray or steam, push
the cover (4) up and fill the tank (5) with water
through the opening (3). Use the measuring jug
(15) for convenience and ease.