Ct-14 hook-up diagram – M-AUDIO CT-14 User Manual
Page 3
1.
With the CT-14 power button in the “out” (off) position, plug the
appropriate end of the supplied 9-Volt DC “wall-wart” power
adapter into your CT-14 and the other end into a wall socket or
power strip. The CT-14 power indicator LED should be off.
2.
Take the output of your digital audio source device and plug it into
the CT-14 coaxial RCA input connector located on the rear of the
CT-14 .
3.
Connect the CT-14’s coaxial RCA digital output connectors to the
inputs of your receiving or “target” digital audio devices. You may
want to connect the analog audio output of one of these target
devices to a sound system for monitoring purposes.
4.
With all volumes turned down, turn on your source device.
5.
Turn on the CT-14 by pressing its power button and allowing it to
latch in the “in” position. The power indicator LED will light on the
front of the CT-14 unit.
6.
Turn on your target devices. Your CT-14 is now ready for use.
CT-14
Hook-Up
Diagram