Specifi cations, Specifi cations (mdt421s) – MITSUBISHI ELECTRIC MDT421S User Manual

Page 44

Advertising
background image

English-40

Specifi cations

Specifi cations (MDT421S)

Product Specifications
LCD Module

Frequency

Pixel Clock
Viewable Size
Input Signal
PC-Input:

VIDEO

Input:

AUDIO

Input:

RS-232C:
Output Signal
PC-Output:

VIDEO

Output:

AUDIO

Output:

Speaker

Output:

RS-232C:
Resolutions Supported

Power Supply
Power Consumption

Operational
Environment
Storage
Environment
Dimension

Weight

Wall mounting interface

Complied Regulatory
and Guidelines
Power Management
Plug & Play
Accessories

Note: Technical specifications are subject to change without notice.

Diagonal:

Pixel Pitch:

Resolution:

Color:

Brightness:

Contrast Ratio:

Response time:

View Angle:

Horizontal:

Vertical:

Video:

Sync:

Input-terminal:

In:

Video:

Sync:

Output-terminal:

Out:

Power Save:

Temperature:

Humidity:

Temperature:

Humidity:

Net:

Gross:

Net:

Gross:

Analog Input
42" / 106.7 cm
0.485 mm
1920 x 1080 pixels (2070000 pixels)
Over 1.0 billion colors (depending on video card used)
700 cd/m

2

(typ.)

1100:1
9 ms (G to G)
Up and Down 178°, Left and Right 178° @CR>10
15.625 / 15.734, 31.5 - 91.1 kHz
50.0 / 58.0 - 85.0 Hz
13.5 - 165.0 MHz
930.3 x 523.3 mm / 36.6 x 20.6 inches

Analog RGB Video: 0.7 Vp-p
Input impedance 75 ohm
Separate HV sync: TTL level (Pos./Neg.), Sync-on-green,
Composite Sync (0.3 Vp-p)
Input Impedance 2.2 K ohm
BNC (R,G,B,H,V), 15 Pin Mini D-sub
Composite: 1.0 Vp-p
Input impedance 75ohm BNC and RCA-PINJACK-INPUT
Y/C Y: 1 Vp-p C: 0.286 Vp-p Input
Impedance 75 ohm S-TERMINAL-INPUT
Component: 1.0 / 0.7 Vp-p
Input Impedance 75 ohm BNC-INPUT
RCA PIN-JACK L/R INPUT x 2, STEREO Mini Jack INPUT x 1
9 Pin Mini D-sub

Analog RGB Video: 0.7 Vp-p with 75 ohm terminated
Separate HV sync: TTL level (Pos./Neg.)
15 Pin Mini D-sub
BNC-OUTPUT x 1, Composite 1.0 Vp-p with 75 ohm terminated
RCA PIN-JACK L/R OUTPUT x 1, 0.15 Vrms with 47k ohm terminated
External Speaker Jack 7 W + 7 W (8 ohm)
9 Pin Mini D-sub
640 x 480 at 60 Hz to 85 Hz
800 x 600 at 50 Hz, 60 Hz to 85 Hz
1024 x 768 at 50 Hz, 60 Hz to 85 Hz
1280 x 768 at 50 Hz, 60 Hz to 85 Hz
1360 x 768 at 50 Hz, 60 Hz to 85 Hz
1280 x 1024 at 60 Hz to 85 Hz
1600 x 1200 at 60 Hz
1920 x 1080 at 60 Hz*

( * : Recommended Resolution)

1920 x 1200 at 60 Hz
NTSC,PAL,SECAM,4.43NTSC,PAL60 Component:480i,480p,720p,1080i,1080p
2.4 - 1.1 A @100 - 240 V AC, 50 / 60 Hz
232 W
3 W or less (Power button ON/Main power switch ON/Sleep mode)
3 W or less (Power button OFF/Main power switch ON)
Landscape: 5 - 40 °C / 41-104 °F, Portrait : 5 - 35 °C / 41 - 95 °F
20 - 80 % (Without condensation)
-20 - 60 °C / -4 - 140 °F
10 - 90% (Without condensation)/90%-3.5%x(Temp-40 °C) regarding over 40 °C
965.6 mm (W) x 558.6 mm (H) x 115.9 mm (D) / 38.02" (W) x 21.99" (H) x 4.56" (D)
1130 mm (W) x 709 mm (H) x 280 mm (D) / 44.49" (W) x 27.91" (H) x 11.02" (D)
51.8 lbs / 23.5 kg (Approximately)
68.3 lbs / 31 kg (Approximately)
12 Holes (100 mm pitches)
Optional Multi-purpose Fix Mount
UL60950-1/C-UL/EN60950-1/FCC-B/DOC-B/EN55022-B
EN55024/EN61000-3-2/EN61000-3-3/C-Tick/CE/BSMI/GOST-R
VESA DPM
VESA DDC2B, DDC/CI
User’s Manual, Power Cord, Video Signal Cable, Remote Controller, AAA Battery x 2,
Clamper x 2 (To prevent from falling), Clamper x 3 (For securing cables), Clamper x 2
(For securing the power cord, HDMI cable, and Display Port cable), Screw for CLAMPER x 2

Digital Input

25.0 - 165.0 MHz

TMDS

HDMI, DVI-D
DISPLAY PORT

Advertising