FIAT Panda - Manual (Page 236)

USER EQ SETTINGS FUNCTION
(equaliser settings only if the USER setting has
been selected)
To set a customised equaliser adjustment, move to
"User" using the
or buttons and press the
MENU button.
A 7-bar graph appears on the display, in which each
bar represents a frequency.
Select the bar to adjust using the
or buttons; the
selected bar will start to flash and it can be adjusted
using the
or buttons.
To store the setting, press the button again. The
display will show the source activated at that time
followed by the text “User”. If the mode is “FM” the
display will show the text "FM EQ User".
MENU
Menu button functions
Press the Menu function briefly to activate the
MENU function. The display will show the first menu
item that can be adjusted (AF) ("AF Switching On" on
the display).
Use the
or buttons to scroll through the menu
functions. To change the setting of the function
selected use the
or buttons.
The current status of the function selected will be
shown on the display.
The functions managed by the Menu are:
❒ AF SWITCHING (ON/OFF);
❒ TRAFFIC INFORMATION (ON/OFF);
❒ REGIONAL MODE regional programmes
(ON/OFF);
❒ MP3 DISPLAY (CD MP3 display settings);
❒ SPEED VOLUME (speed-dependent automatic
volume control);
❒ RADIO ON VOLUME (maximum radio volume
limit activation/deactivation);
❒ SPEECH VOLUME (telephone volume setting);
❒ AUX OFFSET (alignment of the portable device
volume to that of the other sources);
❒ RADIO OFF (switching-off mode);
❒ SYSTEM RESET Press the Menu button again to
exit the Menu function.
Note
The AF SWITCHING, TRAFFIC INFORMATION and
REGIONAL MODE adjustments are only possible in
FM mode.
232
SOUND-S
YSTEM